It has been 21 days now, my ford fiesta's engine was ceased and I changed the piston, sleeves and rings of the engine, got the the block and head phased and then tried to start the engine, the engine started but the compression was leaking, so I again opened the head and replaced the head gasket with a thicker one but this time the engine wont start. When I keep a cloth soaked in petrol near the air inlet then the engine starts but as soon as I remove the cloth the engine stops. After 3 days of testing it was found that the nozzels are not spraying diesel in the chamber, I get all the nozzels cleaned but the problem is still the same. Everything seems alright with the engine just the diesel is not coming.
Any expert, please suggest some solution. I am stuck badly.